Page 1 / 9 Next page
Do Two GeForce GTX 680s Beat Three GeForce GTX 660 Tis In SLI? - Two GeForce GTX 680s or Three GeForce GTX 660 Tis?
12:00 AM - February 18, 2013
When we reviewed Nvidia's GeForce GTX 680, it was the most powerful GK104-based card in the company's line-up (GeForce GTX 680 2 GB Review: Kepler Sends Tahiti On Vacation). Not long after, it was eclipsed by the GeForce GTX 690, though, employing a pair of the same GK104 GPUs running at slightly lower frequencies on a single board (GeForce GTX 690 Review: Testing Nvidia's Sexiest Graphics Card).
The GeForce GTX 690 is a bit quieter than two GeForce GTX 680s in SLI. When it launched, it was also about the same price, though the 680s now cost a little less. They're also faster than the dual-slot 690. So it'd seem that, for $920 bucks or so, two GeForce GTX 680s are about as fast as you can get for under $1,000.
Can anything from Nvidia outpace two 680s for less money? A trio of GeForce GTX 670s would easily get the upper hand, but they'd also push our budget back above $1,100.
The GeForce GTX 670 isn't Nvidia's least-expensive high-performance card, though. The same GK104 graphics processor found in the 690, 680, and 670 can also be found in the company's GeForce GTX 660 Ti (GeForce GTX 660 Ti Review: Nvidia's Trickle-Down Keplernomics). And that board sells for about $290, ducking in under $900 when you buy a trio. Seems like a pretty good match up against those two GeForce GTX 680s, right?
|Gigabyte Vs. Reference GeForce Specs|
|Gigabyte N680OC-4GD||Nvidia GTX 680 2 GB||Gigabyte N66TOC-2GD||Nvidia GTX 660 Ti|
|Full Color ROPs||32||32||24||24|
|Graphics Clock MHz|
|1071 (1137)||1006 (1058)||1032 (1111)||915 (980)|
|Texture Fillrate||137.1 Gtex/s||128.8 Gtex/s||115.6 Gtex/s||102.5 Gtex/s|
|Memory Clock||1502 MHz||1502 MHz||1502 MHz||1502 MHz|
|Memory Bandwidth||192.3 GB/s||192.3 GB/s||144.2 GB/s||144.2 GB/s|
|Graphics RAM||4 GB GDDR5||2 GB GDDR5||2 GB GDDR5||2 GB GDDR5|
|Die Size||294 mm²||294 mm²||294 mm²||294 mm²|
|Process Technology||28 nm||28 nm||28 nm||28 nm|
|Power Connectors||2 x 6-pin||2 x 6-pin||2 x 6-pin||2 x 6-pin|
|Maximum Power||Not Specified||190 W||Not Specified||150 W|
Gigabyte sent over two sets of cards to help answer our question, along with a bit of a surprise: its GeForce GTX 680s were 4 GB versions of the WindForce 3x-based overclocked board. Although N680OC-4GDs represent the best of the best from Gigabyte, they also skew the performance and pricing of our comparison upwards.
A trio of its overclocked GeForce GTX 660 Ti graphics cards would have helped balance the scale, but the trio of N66TWF2-2GDs we received weren't aggressively-tuned enough. We applied the firmware corresponding to Gigabyte's N66TOC-2GD to make this a fairer fight.
More memory and higher frequencies made the GeForce GTX 680s great for comparison purposes, but not as ideal for setting a baseline performance level. Because we also tested the N680OC-4GD in single-card mode, adding one reference GeForce GTX 680 2 GB helped set a standard we could use to determine how much extra speed the specially-tuned cards add.
Page 1 / 9 Next page